2013년 12월 17일 화요일

Juniper JN0-633 인증시험

ITExamDump의Juniper인증JN0-633자료는 제일 적중률 높고 전면적인 덤프임으로 여러분은 100%한번에 응시로 패스하실 수 있습니다. 그리고 우리는 덤프를 구매 시 일년무료 업뎃을 제공합니다. 여러분은 먼저 우리 ITExamDump사이트에서 제공되는Juniper인증JN0-633시험덤프의 일부분인 데모 즉 문제와 답을 다운받으셔서 체험해보실 수 잇습니다.

Juniper인증 JN0-633시험을 패스하여 자격증을 취득하시면 찬란한 미래가 찾아올것입니다. Juniper인증 JN0-633인증시험을 패스하여 취득한 자격증은 IT인사로서의 능력을 증명해주며 IT업계에 종사하는 일원으로서의 자존심입니다. ITExamDump 의 Juniper인증 JN0-633덤프는 시험패스에 초점을 맞추어 제일 간단한 방법으로 시험을 패스하도록 밀어주는 시험공부가이드입니다.구매전Juniper인증 JN0-633무료샘플을 다운받아 적성에 맞는지 확인하고 구매할지 않할지 선택하시면 됩니다.

인재도 많고 경쟁도 많은 이 사회에, IT업계인재들은 인기가 아주 많습니다.하지만 팽팽한 경쟁률도 무시할 수 없습니다.많은 IT인재들도 어려운 인증시험을 패스하여 자기만의 자리를 지키고 있습니다.우리ITExamDump에서는 마침 전문적으로 이러한 IT인사들에게 편리하게 시험을 패스할수 있도록 유용한 자료들을 제공하고 있습니다.

ITExamDump 는 전문적으로 it전문인사들에게 도움을 드리는 사이트입니다.많은 분들의 반응과 리뷰를 보면 우리ITExamDump의 제품이 제일 안전하고 최신이라고 합니다. ITExamDump의 학습가이드는 아주 믿음이 가는 문제집들만 있으니까요. ITExamDump 덤프의 문제와 답은 모두 제일 정확합니다. 왜냐면 우리의 전문가들은 매일 최신버전을 갱신하고 있기 때문입니다.

시험 번호/코드: JN0-633
시험 이름: Juniper (Security, Professional (JNCIP-SEC) Exam)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 110 문항
업데이트: 2013-12-16

JN0-633 덤프무료샘플다운로드하기: http://www.itexamdump.com/JN0-633.html

NO.1 You are troubleshooting an SRX240 acting as a NAT translator for transit traffic. Traffic is
dropping
at the SRX240 in your network. Which three tools would you use to troubleshoot the issue?
(Choose three.)
A. security flow traceoptions
B. monitor interface traffic
C. show security flow session
D. monitor traffic interface
E. debug flow basic
Answer: A,B,C

Juniper   JN0-633시험문제   JN0-633자격증   JN0-633

NO.2 HostA (1.1.1.1) is sending TCP traffic to HostB (2.2.2.2). You need to capture the TCP packets
locally on the SRX240. Which configuration would you use to enable this capture?
A. [edit security flow]
user@srx# show
traceoptions {
file dump;
flag basic-datapath;
}
B. [edit security]
user@srx# show
application-tracking {
enable;
}
flow {
traceoptions {
file dump;
flag basic-datapath;
}
}
C. [edit firewall filter capture term one]
user@srx# show
from {
source-address {
1.1.1.1;
}
destination-address {
2.2.2.2;
}
protocol tcp;
}
then {
port-mirror;
accept;
}
D. [edit firewall filter capture term one]
user@srx# show
from {
source-address {
1.1.1.1;
}
destination-address {
2.2.2.2;
}
protocol tcp;
}
then {
sample;
accept;
}
Answer: D

Juniper   JN0-633덤프   JN0-633 dumps   JN0-633자료   JN0-633 dumps

NO.3 What is the default action for an SRX device in transparent mode to determine the outgoing
interface for an unknown destination MAC address?
A. Perform packet flooding.
B. Send an ARP query.
C. Send an ICMP packet with a TTL of 1.
D. Perform a traceroute request.
Answer: A

Juniper   JN0-633   JN0-633

NO.4 Somebody has inadvertently configured several security policies with application firewall rule
sets
on an SRX device. These security policies are now dropping traffic that should be allowed. You
must find and remove the application firewall rule sets that are associated with these policies.
Which two commands allow you to view these associations? (Choose two.)
A. show security policies
B. show services application-identification application-system-cache
C. show security application-firewall rule-set all
D. show security policies application-firewall
Answer: A,D

Juniper기출문제   JN0-633시험문제   JN0-633 dump   JN0-633 pdf

NO.5 You are asked to establish a baseline for your company's network traffic to determine the
bandwidth usage per application. You want to undertake this task on the central SRX device that
connects all segments together. What are two ways to accomplish this goal? (Choose two.)
A. Configure a mirror port on the SRX device to capture all traffic on a data collection server for
further investigation.
B. Use interface packet counters for all permitted and denied traffic and calculate the values using
Junos scripts.
C. Send SNMP traps with bandwidth usage to a central SNMP server.
D. Enable AppTrack on the SRX device and configure a remote syslog server to receive AppTrack
messages.
Answer: A,D

Juniper dump   JN0-633   JN0-633자격증   JN0-633

NO.6 Which problem is introduced by setting the terminal parameter on an IPS rule?
A. The SRX device will stop IDP processing for future sessions.
B. The SRX device might detect more false positives.
C. The SRX device will terminate the session in which the terminal rule detected the attack.
D. The SRX device might miss attacks.
Answer: D

Juniper dump   JN0-633자격증   JN0-633   JN0-633   JN0-633

ITexamdump의 00M-670덤프의 VCE테스트프로그램과 JN0-380덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 74-353시험에 대비한 고품질 덤프와 VCAW510시험 최신버전덤프를 제공해드립니다. 최고품질 BAS-002시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/JN0-633.html

댓글 없음:

댓글 쓰기